BM 1940

Product

is an automatic water supply system where the pump is mounted on a reclining pressure tank. To prevent vibration from the pump from propagating through the pressure tank and further into space, the pump is mounted on special silencers. The pressure line between the pump and tank is connected with the help of a rubber hose. These pumping systems are inexpensive in procurement with minimal assembly and maintenance expenses. The plant takes up little space.

Info

Here you will find technical details about the pumps and the three sizes available. These can be combined with different equipment and tank sizes. Should you need pumps with a larger capacity than indicated, you can connect two or more pumps.

The pressure tanks are designed so that all pump types can be mounted on one tank. The tanks are produced in Aisi 304 stainless steel.

The pumps are normally supplied with single phase motor with starting capacitor and built-in motor protection switch. In particular, DC and three-phase motors are also supplied.

We also have motors and pressure tanks, for our pumps in stock.

We supply the Brynepumpen in 2 other different capacities:
BM 1234

BM 2745

Technical data

All single phase motors have a starting capacitor and built-in motor protection.

Unless otherwise stated, the pump is supplied as indicated.

** Pressure heights over 25 m are achieved by using larger motors. The maximum pressure on the pumps is 7 kg/cm2 (70 m).

One must make sure that the pressure tank is sturdy enough for the desired pressure.

Due to friction loss, larger dimensions may be required in cases with long distances and large height differences.

Brynepumpen is supplied in a variety of designs with regard to pump size, tank and electric motor. Please feel free to contact us for more information.

Technical data for standard anlegg
Galvanized tanks
Stainless steel tanks version 1
Stainless steel tanks version 2